Standard Pitched Housing
A regular three-tab appearance for villas, residential developments and light-building roof packages.
3-Tab Asphalt Shingles
Single-layer fiberglass asphalt shingles with a regular three-tab profile and mineral-granule finish. Compare dimensions, bundle coverage and project indices for pitched-roof procurement.
Single-Layer 3-Tab ProfileFiberglass Mat1000 × 333 mm21 Pieces / Bundle
Shingle Profile
Single-layer, three-tab
Strip Size
1000 × 333 mm
Bundle Reference
21 strips / approx. 3.1 m²
For project-specific pricing, send your technical requirements and destination port.
Direct Supply OEM Labeling Technical Support
Quick specifications
- Profile
- Single-layer, three-tab cut
- Construction
- Fiberglass mat, asphalt coating and colored mineral-granule face
- Strip Size
- 1000 × 333 mm
- Nominal Thickness
- 2.6 ± 0.1 mm
- Exposed Coverage
- Approx. 0.148 m² per strip at the specified exposure
- Bundle Reference
- 21 strips; approx. 3.1 m² installed coverage; 27 ± 1 kg
- Reference Standard
- GB/T 20474-2015 — specify applicable tests in the purchase order
- Roof Use
- Exposed pitched-roof assembly with the specified deck, underlayment and fixing system
Product overview
3-Tab Roofing for Repeatable Project Takeoffs
This single-layer asphalt shingle uses a fiberglass mat within the asphalt coating and a colored mineral-granule face. Three evenly cut tabs create a consistent course pattern. It is intended for exposed pitched roofs when combined with the correct deck, underlayment, starter, fixing and flashing details.
For procurement, first compare the 1000 × 333 mm strip, nominal 2.6 mm thickness and 21-strip bundle against the roof design. At an exposure of approximately 148 mm, the reference bundle covers about 3.1 m²; ridge, valley and cutting waste require a separate allowance. The proposed supply should be matched to the destination’s wind and fire documentation requirements rather than treating an individual shingle as a complete rated roof assembly.
Applications
Reroofing Procurement
Match the existing roof geometry and local fixing requirements before calculating replacement quantities.
Distributor Programs
Quote by color, bundle count, pallet plan and destination for repeat wholesale orders.
Complex Roof Details
Coordinate separate starter, valley, hip and ridge details for roofs with penetrations or multiple slopes.
Key benefits
Defined Single-Layer Profile
The three-tab cut creates an even course pattern and is distinct from thicker laminated or shaped shingle designs.
Visible Mineral Finish
The exposed granule surface supplies the roof color and protects the asphalt coating from direct sunlight.
Practical Coverage Planning
Strip size, exposure and bundle area help buyers compare takeoffs and freight across quotations.
Project-Matched Roof System
Fastening, wind exposure, fire classification and underlayment must match the complete assembly required at the destination.
Technical specifications
Single-layer 3-tab format. Values below are procurement specification indices for the selected supply configuration.
| Specification | Unit | Condition / Basis | Project Index |
|---|---|---|---|
| Strip dimensions | mm | Length × width | 1000 × 333 |
| Nominal thickness | mm | Single-layer strip | 2.6 ± 0.1 |
| Bundle packing | strips / bundle | 3-tab profile | 21 |
| Installed coverage | m² / bundle | Approx. 148 mm exposure | Approx. 3.1 |
| Bundle mass | kg / bundle | Nominal supply format | 27 ± 1 |
| Tensile strength | N / 50 mm | Longitudinal / transverse | ≥500 / ≥400 |
| Heat resistance | °C | No sliding, flowing or dripping | 90 |
| Low-temperature flexibility | °C | No cracking on bending | 10 |
| Tear resistance | N | Project comparison index | ≥9 |
| Nail pull-through resistance | N | Project comparison index | ≥75 |
Swipe to view the full table →
For submittals, request the current grade-specific TDS and test report. Fire or wind ratings apply only where the proposed roof assembly has the required documentation.
Installation guide
View documents ↓Confirm the Roof Design
Check roof pitch, local code, deck type, climate exposure and the specified shingle system before ordering.
Prepare Deck and Underlayment
Use a sound, clean and dry deck; lay the specified underlayment and eave or valley protection.
Start at the Eaves
Install the compatible starter course and set the first shingle row to the planned exposure and alignment.
Fix and Stagger Courses
Follow the approved nail and joint-offset pattern for the roof pitch and wind zone; finish flashings, valleys, hips and ridges with compatible system details.
Packaging & OEM
Bundle Reference
Plan around 21 strips, about 3.1 m² installed coverage and 27 ± 1 kg per bundle for the quoted configuration.
Quantity Takeoff
Send roof area, pitch, plan complexity and waste allowance to calculate a project bundle count.
Color and Sample
Approve a physical granule-color sample; screen and printed colors may vary from production batches.
Export Quote
State destination, requested color, bundle volume, pallet requirements and project standard in the RFQ.
Technical downloads
3-Tab Asphalt Shingles TDS
Request via contact form
3-Tab Shingle Installation Guide
Request via contact form
Related product
Frequently asked questions
How much roof area does one bundle of 3-tab shingles cover?
The 21-strip reference bundle covers approximately 3.1 m² at about 148 mm exposure. Add an allowance for cutting, roof geometry and detail waste when ordering.
How are 3-tab shingles different from laminated shingles?
A 3-tab strip is single-layer with three regular cutouts, giving a flatter repeated pattern. Laminated shingles use layered profiles for a more dimensional appearance; compare the offered bundle mass and coverage separately.
Can this roof be specified for a high-wind or fire-rated project?
Provide the destination code, roof slope and required classification. We will match the proposed shingle, fasteners, underlayment and assembly documentation to that requirement before specification.
What should a wholesale quotation request include?
Send the color or sample reference, roof area or bundle quantity, project location, roof pitch, required test documents, packaging needs and destination port.
Ready to Help
Quick Inquiry
Leave a quick message regarding your project needs, and our team will get back to you shortly.
+86 15263640998
Email Inquiry